Monday, November 25, 2013

Kayfun Lite and DNA20 gets cloned!

If you’re in the market for a SvoeMesto Kayfun Lite then you better keep your eyes peeled if you spot a deal that seems too good to be true because you could end up buying a fake!

Retailing at RM400 (approx. US$125) here in Malaysia, the Kayfun Lite is the latest atomizer to be cloned by China following the recent release of the cloned Steam Boy Storm Rider and Steam Turbine.


According to posts on various Facebook groups that popped up this afternoon, the Kayfun Lite clone is retailing between RM110 – RM200 (US$35 – 60). The sellers call it a 1:1 clone, but I wouldn’t recommend that you buy one before you check it out in person.

Remember what happened with the Storm Rider clone? The sellers called that a 1:1 clone too, but look how that turned out…

In other clone related news, a lot of interest has been centered around the Vape Tech Amax, a VV/VW mod from China that was released at around the same time as the DNA20 powered Renovation Mods EL3V8TOR.

The manufacturers of the Amax claim on their website that the Amax runs a DNA20 chip, and this sparked a lot of debate among vapers everywhere. Some people (me included) theorized that the manufacturers could be running a genuine DNA20 chip with some cheap tubes, while others were a little more skeptical from the get go.

Tuesday, November 19, 2013

New Arrival: Innokin COOL FIRE I & II

New Arrival at Fairy Gift:

COOL FIRE I 
Main Feature :
Supports 18350 batteries - maximum current output is more than 5000mA.
Rated power of 8.5W, which is perfectly suitable for 2.0 ohm iClear dual coil clearomizers.
Reverse Battery Protection Circuit.
Built in 7A fuse for protection and stability.
Short Circuit Protection.
ON/OFF battery switch.
LED Battery Power Display.
Low Voltage Warning.
Overtime Vaping Warning (10 second switch cutoff). Battery safety protection (Vent holes).
High compatibility 510 connector:Will fit iClear16, and iClear30 dual coil clearomizers, as well as standard 510 accessories


COOL FIRE II New Arrival
FEATURES:
Scale Display Wattage
Scale display wattage improves intuitive control and provides more accurate performance.
Variable Wattage: The rotational wheel adjusts wattage to the following:
7.0, 8.0, 8.5, 9.0,9.5, 10.5, 11.0 , 12.0 ,12.5.
Battery Level Indicator:
The battery capacity is displayed via green, yellow, and red LED lights. Green = Fully ChargedYellow = Half DischargedRed = Charge Needed
Reverse Battery Protection Circuit.
Built in 7A fuse for protection and stability.
Short Circuit Protection.( 0.6 +/-0.2 ohm )
ON/OFF battery switch.
LED Battery Power Display.
Low Voltage Warning.
Overtime Vaping Warning (10 seconds switch cutoff).
Battery safety protection (Vent holes).
High compatibility 510 connector: Will fit iClear16, iClear30 and iClear30S etc dual coil clearomizers, as well as standard 510 accessories

Vision Spinner 1300 eGo Battery V2 Coming Soon

A genuine Rainbow Vision Spinner 1300 eGo battery! The Rainbow Vision Spinner VV eGo Battery 1300mAh comes with eGo threading, it works with a variety of eGo threaded atomizers, tanks systems, and clearomizers.
The Vision Rainbow Spinner 1300mAh eGo Variable Voltage Battery allows you to adjust voltage output from 3.3v to 4.8v by spinning the knob at the bottom. Each increment is 0.1v.
This is the highest capacity variable voltage eGo battery available today! Vape at your desired voltage! Higher voltage means more vapor. This 1300mAh Vision Spinner is compact making it the most powerful variable voltage device available. With its high capacity battery cell you can Vape for hours on a single charge!*
*Note: Results may vary. Using the battery at a higher voltage output will drain the battery quicker than when using it at a lower voltage. Standard Joyetech eGo series batteries output a regulated voltage of approximately 3.2v.
The Spinner has a dial located at the base of the battery. The Spinner has four markings to indicate approximate output voltages at 3.3, 3.8, 4.3, and 4.8 volts but is adjustable throughout the entire voltage range. Simply turn the dial to your desired vaping voltage. It features an easy to read numbered dial.
NOTE: Vision Spinner 2 is coming soon!